Epoxy Resin Art 609 1:1 | 2L Kit

or 4 payments of $26.25 with Info

Fast Dispatch, Leaves warehouse in 1 business day
Only 15 left!

Epoxy Resin | Resin Art 609 1:1 | 2L Kit

Kit Includes:

1 x 1L Part A Bottle

1 x 1L Part B Bottle

Resin Art 609 is a clear, flexible two part epoxy resin designed to be used thinly over large surface areas. Resin Art 609 is ideal when a high degree of impact resistance and a smooth even finish is required.
Resin Art 609 is tough, flexible, water clear, self levelling, glass like epoxy coating system. Recommended for resin art, decoupage and coating wood, photographs and large surface areas.

Resin Art ✔  Coating Wood ✔  Timber ✔  Canvas ✔  Large Surface Areas ✔  Decoupage ✔ Chopping Boards ✔ Food Contact Safe ✔

  • Mixing Ratio 1:1 Volume
  • Working time 20min @ 25° C
  • Low Viscosity
  • Ultra Clear Finish
  • UV Resistant
  • Self Leveling

Pour Depth 1 mm – 2 mm
Temperature Resistance – up to 80 degrees Celsius


1 Combined litre, 500ml Part A & 500ml Part B will cover approximately 1 sq mtr @ 1mm Depth


A tough flexible, water clear, self levelling glass like epoxy coating system. Poured over existing art work, a single coating can equal 50 coats of varnish. Resin Art 609 is a new art medium, when used with pigments and dyes it gives a deep 3D glass art look,
also recommended for decoupage and coating wood, photographs and metal


Ensure that the object to be coated is clean and dry, but most importantly set up the object on a plastic covered level surface. Establish the surface is level using a spirit level.


1 part A to 1 part B by volume. Mix thoroughly in a straight sided, flat bottomed container. Do not mix in an ice cream container. Use a flat ruler shaped mixing stick. Mix well scraping around the sides and base of the container. Mix until the material is crystal clear free of any streaks. 

Always keep caps on bottles when not in use. Store at room temperature (18°) away from direct sunlight.
Do not store on concrete floors.

Work in a well-ventilated area. Avoid contact with eyes and skin. Wear protective gloves and glasses when mixing and using. Over-exposure may cause sensitization. Uncured material can be removed with a solvent or methylated spirit followed by washing
with warm soapy water. Always wear a mask when using any solvent cleaner.

 Curing temp 20°C
 Thickness 1mm - 2mm 1 days
 Full Cure 3 days

Customer Reviews

Based on 14 reviews
Jennie Absolom
Resin art

This is a wonderful resin. Will always use it, had no problems with it at all.

Joan McHenry
I have some concerns a out the clarity of the product. As I am new to resin I am not sure what ty...

I make a lot of trays and clock faces, plus deeper roses etc so do I use the same resin for these.

Hi Joan

Thank you for using our products.

Our 609 is not designed for deeper pours, it is best to use our Casting Resin for your needs.

Thank you
Solid Solutions Team :)

Kerry Holmes

Brilliant will be ordering more

Helena Pluim
Ms happy

Well wrapped arrived on time, good service Thankyou

Honi Pimblett
Absolutely brilliant!

I have never used resin/epoxy before and this product was so simple to mix and use, I’ll definitely be using it again