Art Resin Epoxy 1:1 | 10L Kit
or 4 payments of $40.46 with
Info
The Art Resin Epoxy 1:1 10L Kit is our largest size of clear epoxy resin with hardener, for big canvases, large surface areas and studio use. Equal-parts mixing keeps large batches simple, and it cures to a crystal clear, high-gloss, self-levelling finish that is heat resistant up to about 80 °C once cured.
Product details
Kit size
10L
Mix ratio
1:1 by volume
Working time
Approx. 30 minutes at 25 °C
Pour depth
Up to 12 mm per pour
Coverage
1 litre ≈ 1 m² at 1 mm
Touch dry
Approx. 8 hours
Full cure
Approx. 72 hours
Heat resistance
Up to approx. 80 °C
Key features
Easy 1:1 mix ratio
Crystal clear, high gloss
Self-levelling
Low viscosity
UV-resistant formulation
Low odour
Heat resistant to 80 °C
What's in the 10L Kit
Part A
5L resin
Part B
5L hardener
Coverage
≈ 10 m² at 1 mm
Best for
Resin art
Canvas coating
Timber
Coasters and trays
Small moulds
Jewellery
Colour work with pigments and mica
Large surface areas
How to use Art Resin Epoxy 1:1
1
Prepare the surface
Make sure the surface is clean and dry. Seal porous surfaces first to help prevent air release and resin absorption.
2
Measure 1:1
Measure Part A (resin) and Part B (hardener) in equal parts by volume.
3
Mix thoroughly
Mix for at least 3 minutes, scraping the sides and base of the container.
4
Pour
Pour and let the resin self-level. For items with rounded edges, let the mixed resin sit for about 15 minutes first so it thickens and holds on the edges.
5
Remove bubbles
Pass gentle heat over the surface to remove any bubbles, then leave it to cure.
Pour up to 12 mm in one pour. Build thicker pieces in layers.
FAQs
Safety & storage
Protection
Wear protective gloves, a mask and safety glasses when mixing and using. Always wear a suitable mask when using solvent-based cleaners.
Ventilation
Use in a well-ventilated area. Avoid contact with eyes and skin. Over-exposure may cause sensitisation.
Storage
Keep containers tightly sealed. Store at room temperature (approx. 18 °C), away from direct sunlight and not directly on concrete floors.
Clean-up
Clean tools and surfaces with orange citrus solvent, methylated spirits or a resin cleaner. If resin gets on your skin, wipe it off and wash with soap and water. Never use solvents on skin.
Art Resin Epoxy 1:1 | 10L Kit