Epoxy Casting Resin 1:1 | 10L Kit
$280.00
or 4 payments of $70.00 with
Info
The Epoxy Casting Resin 1:1 10L Kit is a bulk size of crystal clear casting resin for studios, makers and larger block castings. It gives about 60 minutes of working time at 20 °C, pours from 1 mm to 50 mm, and bonds well to wood, glass and ceramics.
Product details
Kit size
10L
Mix ratio
1:1 by volume
Working time
60 minutes at 20 °C
Pour depth
1–50 mm
Set
Approx. 24 hours
Full cure
2–4 days (longer for thin pours)
Heat resistance
Up to 80 °C
Finish
Crystal clear, glass-like
Key features
Crystal-clear clarity
Easy 1:1 mixing
Low bubble formula
UV resistance
Low odour formula
Bonds to wood, glass and ceramics
What's in the 10L Kit
Part A
1 x 5 Litre resin
Part B
1 x 5 Litre hardener
Mix ratio
1:1 by volume
Best for
Block Casting
Jewellery Making
Flower Preservation
Pendants
Bangles
Timber
Earrings
Necklace Making
Clear Doming Resin
Key Rings
Medallions
Chopping Boards
Coasters
Art pieces
How to use Epoxy Casting Resin
1
Measure
Measure equal parts of resin and hardener.
2
Mix
Mix slowly and thoroughly for 3–5 minutes until clear.
3
Pour
Pour into your chosen mould or project, from 1 mm up to 50 mm. Embed objects or layer colours as you go.
4
Remove bubbles
Pass a propane torch over the surface to release micro bubbles.
5
Cure
Allow about 24 hours to set and 2–4 days for full cure.
About 60 minutes working time at 20 °C. Thin pours take longer to fully cure.
FAQs
Safety
Protection
Wear protective gloves and glasses when mixing and using. Always wear a mask when using any solvent cleaner.
Ventilation
Work in a well-ventilated area. Avoid contact with eyes and skin. Over-exposure may cause sensitisation.
Clean-up
Clean tools and surfaces with orange citrus solvent, methylated spirits or a resin cleaner. If resin gets on your skin, wipe it off and wash with soap and water. Never use solvents on skin.
Bubbles
Use a propane torch to release micro bubbles from the surface after pouring.
Epoxy Casting Resin 1:1 | 10L Kit
$280.00