Fast Cure Epoxy Resin 1:1 | 500mL Kit
or 4 payments of $5.68 with
Info
The Fast Cure Epoxy Resin 1:1 500mL Kit is a small, easy kit of quick setting clear epoxy resin, ideal for trying resin casting. It has 250mL of resin and 250mL of hardener that mix in equal parts by volume, and most pieces can be demoulded in about 4 hours. Use it for pendants, earrings, key rings, flower preservation and doming, pouring 1–15 mm per layer.
Product details
Kit size
500mL
Mix ratio
1:1 by volume
Working time
15–20 minutes at 20 °C
Demould
Approx. 4 hours
Full cure
8–10 hours (longer for thin pours)
Pour depth
1–15 mm per layer
Heat resistance
Up to 80 °C once cured
Finish
Crystal clear, high gloss
Key features
Demould in about 4 hours
Easy 1:1 mix ratio
Crystal clear finish
Low bubble formula
Low odour
Heat resistant to 80 °C
What's in the 500mL Kit
Part A
250mL resin
Part B
250mL hardener
Demould
≈ 4 hours
Best for
Silicone moulds
Jewellery and pendants
Earrings and bangles
Key rings and medallions
Flower preservation
Coasters and trays
Doming
Small block casting
Timber
How to use Fast Cure Epoxy Resin
1
Measure 1:1
Measure equal parts Part A (resin) and Part B (hardener) by volume, not by weight.
2
Mix thoroughly
Mix slowly for 4 minutes in a straight-sided, flat-bottomed container with a flat mixing stick, scraping the sides and base until the mix is crystal clear with no streaks.
3
Let it de-air
Leave the mixed resin to sit for about 2 minutes so air can rise out.
4
Pour
Pour into your mould or onto your piece, up to 15 mm per layer.
5
Release bubbles and demould
Pass a butane torch over the surface without touching the resin. Most pieces can be demoulded after about 4 hours.
Pour up to 15 mm per layer. For deeper pieces, pour in layers.
FAQs
Safety & storage
Protection
Wear protective gloves and glasses when mixing and using. Always wear a mask when using any solvent cleaner.
Ventilation
Work in a well-ventilated area. Avoid contact with eyes and skin. Over-exposure may cause sensitisation.
Storage
Keep caps on bottles when not in use. Store at room temperature (approx. 18 °C), away from direct sunlight and not on concrete floors.
Clean-up
Clean tools and surfaces with orange citrus solvent, methylated spirits or a resin cleaner. If resin gets on your skin, wipe it off and wash with soap and water. Never use solvents on skin.
Fast Cure Epoxy Resin 1:1 | 500mL Kit