Solid Cast 606 | Clear Wood Epoxy 3:1 - 12kg Kit
or 4 payments of $74.81 with
Info
The Solid Cast 606 Clear Wood Epoxy 3:1 12kg Kit is a workshop size of ultra-clear wood epoxy for coating tabletops, trays and furniture. It pours 1–2 mm thick without run off, levels itself to a glass like finish equal to 50 coats of varnish, and gives 40 minutes of working time at 25 °C.
Product details
Kit size
12kg
Mix ratio
3:1 by weight
Working time
40 minutes at 25 °C
Coating thickness
1–2 mm per pour
Cure at 20–30 °C
Approx. 24 hours
Max impact strength
After 5 days
Heat resistance
Up to 80 °C
Max block casting
Around 250 mL
Key features
Ultra Clear Finish
Low Viscosity
Self levelling
Matches 50 coats of varnish
Glass like finish
Tough surface for wood
Food Contact Safe
What's in the 12kg Kit
Part A
3 x 3kg of Part A in 4 litre Bottles
Part B
3 x 1kg Part B in 1 Litre Bottles
Mix ratio
3:1 by weight
Best for
Clear Top Coat
Timber
Fill Small Holes in Timber
Necklace Making
Clear Doming Resin
Key Rings
Medallions
Pendants
Bangles
Earrings
Tabletops
Trays and placemats
Metal badges
How to use Solid Cast 606
1
Weigh 3:1
Measure 3 parts A to 1 part B by weight on a scale. Do not mix by volume.
2
Mix
Mix in a straight sided, flat bottomed container with a flat, ruler shaped stick. Scrape the sides and base until the mix is crystal clear and free of streaks.
3
Pour
Pour over the timber at 1–2 mm and let it self level. Prefill knot holes and larger defects first.
4
Remove bubbles
Safely pass a propane torch flame over the surface. Repeat after 15 minutes for bubbles rising from the wood.
5
Cure
Keep between 20 °C and 30 °C. A thin layer cures in about 24 hours, with maximum impact strength after 5 days.
Mix by weight, not volume. About 40 minutes working time at 25 °C. Do not let the temperature drop below 20 °C while curing.
FAQs
Safety & storage
Protection
Wear protective gloves and glasses when mixing and using. Always wear a mask when using any solvent cleaner.
Ventilation
Work in a well-ventilated area. Avoid contact with eyes and skin. Over-exposure may cause sensitisation.
Storage
Always keep caps on bottles when not in use. Store at room temperature (18 °C) away from direct sunlight. Do not store on concrete floors.
Clean-up
Clean tools and surfaces with orange citrus solvent, methylated spirits or a resin cleaner. If resin gets on your skin, wipe it off and wash with soap and water. Never use solvents on skin.
Solid Cast 606 | Clear Wood Epoxy 3:1 - 12kg Kit