Solid Cast 606 | Resin Jewellery 3:1 - 4kg Kit
or 4 payments of $27.93 with
Info
The Solid Cast 606 Resin Jewellery 3:1 4kg Kit is a larger size of hard, super ultra clear epoxy resin for jewellery makers, badge makers and small-batch casting. It domes cleanly over artwork and metal badges, casts pendants, earrings and key rings, and gives about 40 minutes of working time at 25 °C.
Product details
Kit size
4kg
Mix ratio
3:1 by weight
Working time
40 minutes at 25 °C
Finish
Super ultra clear
Cure at 20–30 °C
Approx. 24 hours
Max impact strength
After 5 days
Heat resistance
Up to 80 °C
Max block casting
Around 250 mL
Key features
Super Ultra Clear Finish
Low Viscosity
Clear Doming Resin
Hard clear finish
Matches 50 coats of varnish
Food Contact Safe
What's in the 4kg Kit
Part A
1 x 3kg of Part A in a 4 litre Bottle
Part B
1 x 1kg Part B in a 1 Litre Bottle
Mix ratio
3:1 by weight
Best for
Jewellery Making
Pendants
Bangles
Timber
Earrings
Necklace Making
Key Rings
Medallions
Doming artwork
Metal badges
Paperweights
How to use Solid Cast 606 Resin Jewellery
1
Weigh 3:1
Measure 3 parts A to 1 part B by weight on a scale. Do not mix by volume.
2
Mix
Mix in a straight sided, flat bottomed container with a flat, ruler shaped stick. Scrape the sides and base until the mix is crystal clear and free of streaks.
3
Colour
Add pigments or transparent dyes if you want colour.
4
Pour or dome
Pour into silicone moulds, or dome over artwork and badges and let the surface tension form the dome.
5
Cure
Keep between 20 °C and 30 °C. A thin layer cures in about 24 hours, with maximum impact strength after 5 days.
Mix by weight, not volume. About 40 minutes working time at 25 °C. Do not let the temperature drop below 20 °C while curing.
FAQs
Safety & storage
Protection
Wear protective gloves and glasses when mixing and using. Always wear a mask when using any solvent cleaner.
Ventilation
Work in a well-ventilated area. Avoid contact with eyes and skin. Over-exposure may cause sensitisation.
Storage
Always keep caps on bottles when not in use. Store at room temperature (18 °C) away from direct sunlight. Do not store on concrete floors.
Clean-up
Clean tools and surfaces with orange citrus solvent, methylated spirits or a resin cleaner. If resin gets on your skin, wipe it off and wash with soap and water. Never use solvents on skin.