Solid Cast 660 Polyurethane Casting Resin 4L kit, 2L Part A resin bottle with carry handle
Grey plastic gear-shaped parts cast using Solid Cast 660 Polyurethane Casting Resin, showing fine detail reproduction

Solid Cast 660 | Polyurethane Casting Resin 1:1 | 4L Kit

$149.99

or 4 payments of $37.49 with Afterpay Info

Add to Wishlist

american expressapple paymasterpaypalvisaafterpay

Solid Cast 660 Polyurethane Casting Resin 1:1 | 4L Kit

Extremely fluid, light amber, low odour reactive polyurethane that pours like water into a mould, reproducing the finest details. Mixed at a simple 1:1 ratio and naturally degassed, it sets quickly into a firm, durable plastic that can typically be demoulded in around 15 minutes.

Kit Includes

1 x 2L Part A (resin) 1 x 2L Part B (hardener)

Product Details

Kit Size
4L (2L + 2L)
Mix Ratio
1:1 by volume
Working Time
2 – 2.5 minutes @ 20°C
Demould Time
15 – 40 minutes @ 20°C
Shore Hardness
75D
Filler Capacity
Up to 200%
Minimum Mix Volume
100ml combined (A + B)

Key Features

Extremely fluid Low odour Naturally degassed High filler capacity Reproduces fine detail

Common Uses

Models & figurines Jewellery casting Industrial parts Decorative pieces Car restoration (knobs, switches, trims)

How to Use

1
Shake both Part A and Part B bottles well before use.
2
Measure out equal parts A and B by volume — for example, 100ml Part A to 100ml Part B — into a straight-sided, flat-bottomed container. For optimal mixing, use a minimum of 100ml combined A and B.
3
Mix thoroughly with a flat, ruler-shaped stick, scraping the sides and base. Work time is short, so mix in under a minute until the colour is streak-free and uniformly light amber.
4
Pour immediately into your silicone rubber mould. Demould after 15 – 40 minutes at 20°C.

Colour & Fillers

Solid Cast 660 cures to an amber/white finish, or cloudy white if any moisture is absorbed during mixing. It can be coloured using epoxy pigments, dyes and mica powders, and accepts a filler ratio of up to 200% (mineral or metallic) to imitate materials like bronze or aluminium.

Storage & Safety

Solid Cast 660 is moisture sensitive — replace the caps on both bottles immediately after use to prevent premature curing or clouding.

Frequently Asked Questions

What is Solid Cast 660 Polyurethane Casting Resin?+
Solid Cast 660 is an extremely fluid, low odour reactive polyurethane casting resin that pours like water into a mould, reproducing the finest surface details. This 4L kit contains 2L Part A and 2L Part B.
What's the mix ratio for Solid Cast 660?+
Mix Part A and Part B at a simple 1:1 ratio by volume — for example, 100ml of Part A to 100ml of Part B — until the mixture is streak-free.
How long does it take to set and demould?+
Working time is 2 – 2.5 minutes at 20°C, and pieces can typically be demoulded within 15 – 40 minutes at 20°C.
Can Solid Cast 660 be coloured or filled?+
Yes. It accepts epoxy pigments, dyes and mica powders for colour, and can take a filler ratio of up to 200% (mineral or metallic) to imitate materials like bronze or aluminium.
Ask a Question
Reviews

Customer Reviews

Based on 13 reviews
92%
(12)
0%
(0)
8%
(1)
0%
(0)
0%
(0)
L
Lesly Bell
Solid cast 600 polyurethane casting resin 4lt kit

Easy to order online and value for money 💰 highly recommended definitely buy again 👍

N
No Russell Fuller

It works

K
Kerry Poynton
Solid Cast 660

I have used this resin before. I find it works for casting in my 2-part Moulds. Although can be a bit thinner than I need.
Can you recommend a filler to it to make it a bit thicker before pouring.
Would you add it to part A or part B.
I know talcum powder can be used, but not sure which part to add it to.

A
Andrew Russell
Casting resin

Great product, amazing stuff for the project i have been working on.. i will definitely be buying again..

K
Kerry Poynton
Solid Cast 660

Works out well for my purpose. Although I am finding it is setting a bit too fast.
Do you offer a product that has a longer working time?

A
Anita Papoulis

Solid Cast 660 | Polyurethane Casting Resin 1:1 | 4L Kit

123